Turbocharging a Harbor freight Vibratory Tumbler (Making it work as it should)


Results 1 to 1 of 1

Thread: Turbocharging a Harbor freight Vibratory Tumbler (Making it work as it should)

  1. #1

    Default Turbocharging a Harbor freight Vibratory Tumbler (Making it work as it should)

    I bought a Harbor Freight Vibratory Tumbler. It fell way short of expectations so I applied a little simple physics and I now have a great Tumbler. In production it would have cost no more to implement than the original flawed design.

    Turbocharging a Harbor freight Vibratory Tumbler (Making it work as it should)-dsc_3563-jpg Turbocharging a Harbor freight Vibratory Tumbler (Making it work as it should)-dsc_2088-jpg

    I made a video explaining the very simple modification that I made which transformed the machine. I regard the problem as a design flaw and in production it would have cost no more to have done it correctly. See what you think. I suggest watching it on Youtube.



    Similar Threads:
    Attached Thumbnails Attached Thumbnails Turbocharging a Harbor freight Vibratory Tumbler (Making it work as it should)-dsc_3563-jpg   Turbocharging a Harbor freight Vibratory Tumbler (Making it work as it should)-dsc_2088-jpg  
    Last edited by tonyfoale; 05-13-2021 at 03:11 PM. Reason: video did not show


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Turbocharging a Harbor freight Vibratory Tumbler (Making it work as it should)

Turbocharging a Harbor freight Vibratory Tumbler (Making it work as it should)