Auto feeding ATC feedback from Omni Cnc End User


Results 1 to 4 of 4

Thread: Auto feeding ATC feedback from Omni Cnc End User

  1. #1


  2. #2
    Banned
    Join Date
    Dec 2019
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: Auto feeding ATC feedback from Omni Cnc End User

    In general starting flat, I find the mids are a bit intense around 2khz so I've been cutting those substantially (not sure if this is the right move). I believe it's reducing the feedback to some degree. Not sure if there is a more appropriate midrange frequency I can cut or boost.



  3. #3
    Banned
    Join Date
    Dec 2019
    Posts
    53
    Downloads
    0
    Uploads
    0

    Default Re: Auto feeding ATC feedback from Omni Cnc End User

    I believe it's reducing the feedback to some degree. Not sure if there is a more appropriate midrange frequency I can cut or boost.











    Kodi nox



  4. #4
    samlrs's Avatar
    Join Date
    Oct 2020
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Auto feeding ATC feedback from Omni Cnc End User

    Hard to understand what he is doing because the camera stationed too far=(



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Auto feeding ATC feedback from Omni Cnc End User

Auto feeding ATC feedback from Omni Cnc End User