- Test movements for a new CNC with Trunnin Table A/C
-
Member
Test movements for a new CNC with Trunnin Table A/C
Just some mechanics tests of a new CNC 5 axis before to finish cooler spindle system and work some piece
The CNC and table was home-made by a friend of mine for its home uses.
Some tech info:
- X Brushless 1.5Kw.
- YZ Brushless 0.95Kw.
- A Brushless 1.5 kw.
- C Brushless 0.5 Kw.
- A & C on Harmonic drives ratio 100: 1.
- XYZ F30500 mm / min max.
- AC F11000 mm / min max.
- Rails hiwin QR series.
- Spindle ATC ISO 20 40,000 rpm liquid cooled.
- Tools holder with 16 tools + tool presetter.
- Controller RosettaCNC 6 axis + RTCP engine and dynamic Jerk control.
- CAD / CAM for test BobCAD / CAM V32 full edition.
Waiting for cooler to begin to cut !!!
Similar Threads:
-
- Test movements for a new CNC with Trunnin Table A/C
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules