Hi,
correction.........Mach4Hobby has six out-of-band axes just like Mach4Industrial.
Craig
I hope this helps many of you.
Similar Threads:
- Need Help!- YOOCNC M3-USB-JB4 Motion control card not recognized by Mach3 software
- Mach3 Motion card XHC 5th MK4-V 4 AXIS mach3 cnc motion control breakout board
- KL-1212 CNC Router ~48″ x 48″ x 6.0″, with Mach3 or Mach4 control using Ethernet SmoothStepper Board - No Longer Available
- Artsoft Mach3 / 4 new software
Hi,
correction.........Mach4Hobby has six out-of-band axes just like Mach4Industrial.
Craig
This comparison is listed on Artsoft's site, so I would recommend contacting them to correct it if that's the case.
Please review the link under versions comparisons.
https://www.machsupport.com/download...main-programs/
Hi,
the correction was provided by smurph, the lead developer of Mach4 at New Fangled Solutions, formerly Artsoft.
Additionally I have used two out-of-band axes with Mach4Hobby....so I know it works.
Craig