How To Set Woodworking CNC Router Controlled By DSP A11


Results 1 to 20 of 20

Thread: How To Set Woodworking CNC Router Controlled By DSP A11

  1. #1
    Member elephantcnc's Avatar
    Join Date
    Nov 2011
    Location
    shandong
    Posts
    260
    Downloads
    0
    Uploads
    0

    Lightbulb How To Set Woodworking CNC Router Controlled By DSP A11

    E-mail: manager@elephant-cnc.com Web: www.elephant-cnc.com
    --------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------


  2. #2
    Registered KyawHtoo's Avatar
    Join Date
    Feb 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    Thank you, this is very useful to me. However, I still have some questions. I sent you an email and I look forward to your reply!



  3. #3
    Member he1957's Avatar
    Join Date
    Jun 2018
    Location
    Tasmania
    Posts
    362
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    Could you please post Q and A here?

    (If it's not private or confidential of course!)

    Thanks :-)



  4. #4

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    hello ,if you have any question ,please contact me ,our mail: manager@elephant-cnc.com

    To be first brand CNC Manufacturer & Wholesaler platform.
    --------Jinan Blue Elephant CNC Machinery Co., Ltd--------


  5. #5

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    This is our website?there are a lot of instructional videos on it, if you are interested, please look at it.
    https://www.china-cnczone.com/catego...ol-system/dsp/

    To be first brand CNC Manufacturer & Wholesaler platform.
    --------Jinan Blue Elephant CNC Machinery Co., Ltd--------


  6. #6
    Member elephantcnc's Avatar
    Join Date
    Nov 2011
    Location
    shandong
    Posts
    260
    Downloads
    0
    Uploads
    0

    Lightbulb Re: How To Set Woodworking CNC Router Controlled By DSP A11

    How To Upgrade DSP A11 Control System


    E-mail: manager@elephant-cnc.com Web: www.elephant-cnc.com
    --------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------


  7. #7
    Member elephantcnc's Avatar
    Join Date
    Nov 2011
    Location
    shandong
    Posts
    260
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    How To Work In DSP A11 Handle Control System


    E-mail: manager@elephant-cnc.com Web: www.elephant-cnc.com
    --------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------


  8. #8
    Member elephantcnc's Avatar
    Join Date
    Nov 2011
    Location
    shandong
    Posts
    260
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    Display The Function Of High/Low Speed Mode In DSP A11 Control System



    E-mail: manager@elephant-cnc.com Web: www.elephant-cnc.com
    --------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------


  9. #9
    Member he1957's Avatar
    Join Date
    Jun 2018
    Location
    Tasmania
    Posts
    362
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    Do you have a setup guide for setting spindle speed control?



  10. #10
    Member elephantcnc's Avatar
    Join Date
    Nov 2011
    Location
    shandong
    Posts
    260
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    Are you a DSP A11 system, if so, please see:
    How To Set Woodworking CNC Router Controlled By DSP A11-c76tcd-j_-8-ww8mq-bz-1-jpg
    How To Set Woodworking CNC Router Controlled By DSP A11-kwbj-jo0niw-cwqi-6q2-jpg
    On/off button and z+ button are increasing speed
    On/off button and z-button are speed reduction

    E-mail: manager@elephant-cnc.com Web: www.elephant-cnc.com
    --------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------


  11. #11
    Member he1957's Avatar
    Join Date
    Jun 2018
    Location
    Tasmania
    Posts
    362
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    Hi,

    Thanks for the reply. What you are showing in the picture is how to control spindle speed manually from the hand control.

    This works in two ways:

    1. When the machine is not running G-Code:

    1a. Holding the two-button sequence of "On-Off" and the "Z+" or "Z-" button to increase or decrease spindle speed


    2. When the machine is running G-Code:

    2a. Pressing the "Z+" or "Z-" button to increase or decrease spindle speed dynamically

    What I am asking is how to set up the A11 so that it responds to the spindle speed using the "S rpm_value" word embedded within a G-Code program.


    Thanks :-)



  12. #12
    Member ZASto's Avatar
    Join Date
    Apr 2005
    Location
    Vanuatu
    Posts
    304
    Downloads
    3
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    No way.
    A11 has dedicated digital outputs that interfaces with VFD in which are programmed different speeds that correspond to A11 outputs.
    No PWM or 0-10V output from A11 (or any of that kind of CNC controllers with Ti DSP inside, made by Richnc - or knockoffs).

    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.


  13. #13
    Member he1957's Avatar
    Join Date
    Jun 2018
    Location
    Tasmania
    Posts
    362
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    Quote Originally Posted by ZASto View Post
    No way.
    A11 has dedicated digital outputs that interfaces with VFD in which are programmed different speeds that correspond to A11 outputs.
    No PWM or 0-10V output from A11 (or any of that kind of CNC controllers with Ti DSP inside, made by Richnc - or knockoffs).

    Yes, understand the A11 controls spindle speed using a set of binary numbers. (1-8)

    Example spindle speeds:

    0
    6000
    9000
    12000
    16000
    20000
    22000
    24000

    (or similar depending on the spindle/drive combination)

    The above corresponds to the spindle speed steps obtained via the DSP speed numbers 1 through 8. I have my A11 selecting the nearest RPM corresponding to the speed value (1-8) according to the above but am wondering if there is a better way to do it.

    Example, If I select S1 spindle stays stopped. S2000 or S5000 would select 6000 RPM (closest to 6000 and slowest RPM I have), S8000 or S10000 would be 9000 RPM, S16000 is 16000 RPM etc.

    The A11 shows the selected speed using the values 1-8.



  14. #14
    Member ZASto's Avatar
    Join Date
    Apr 2005
    Location
    Vanuatu
    Posts
    304
    Downloads
    3
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    Ask Richnc to rewrite the code for dsp
    As I wrote, there is no other way to select spindle speed.

    Make no mistake between my personality and my attitude.
    My personality is who I am. My attitude depends on who you are.


  15. #15
    Member elephantcnc's Avatar
    Join Date
    Nov 2011
    Location
    shandong
    Posts
    260
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    Quote Originally Posted by he1957 View Post
    Hi,

    Thanks for the reply. What you are showing in the picture is how to control spindle speed manually from the hand control.

    This works in two ways:

    1. When the machine is not running G-Code:

    1a. Holding the two-button sequence of "On-Off" and the "Z+" or "Z-" button to increase or decrease spindle speed


    2. When the machine is running G-Code:

    2a. Pressing the "Z+" or "Z-" button to increase or decrease spindle speed dynamically

    What I am asking is how to set up the A11 so that it responds to the spindle speed using the "S rpm_value" word embedded within a G-Code program.


    Thanks :-)
    Hello, friend, you can refer to this video
    https://vk.com/elephantcnc?z=video40...wall_409164950

    E-mail: manager@elephant-cnc.com Web: www.elephant-cnc.com
    --------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------


  16. #16

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    How To Use Tool Sensor In DSP A11 Handle Control System



    To be first brand CNC Manufacturer & Wholesaler platform.
    --------Jinan Blue Elephant CNC Machinery Co., Ltd--------


  17. #17
    Member elephantcnc's Avatar
    Join Date
    Nov 2011
    Location
    shandong
    Posts
    260
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    How To Input File In DSP A11 Handle Control System


    E-mail: manager@elephant-cnc.com Web: www.elephant-cnc.com
    --------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------


  18. #18
    Member elephantcnc's Avatar
    Join Date
    Nov 2011
    Location
    shandong
    Posts
    260
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    How To Back To "Home" In DSP A11 Handle Control System



    E-mail: manager@elephant-cnc.com Web: www.elephant-cnc.com
    --------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------


  19. #19
    Member elephantcnc's Avatar
    Join Date
    Nov 2011
    Location
    shandong
    Posts
    260
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    How To Continue To Work After Set The Breakpoint In DSP A11 Handle Control System



    E-mail: manager@elephant-cnc.com Web: www.elephant-cnc.com
    --------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------


  20. #20
    Member elephantcnc's Avatar
    Join Date
    Nov 2011
    Location
    shandong
    Posts
    260
    Downloads
    0
    Uploads
    0

    Default Re: How To Set Woodworking CNC Router Controlled By DSP A11

    Display The Function Of Step Mode And Distance Mode In DSP A11 Contol System



    E-mail: manager@elephant-cnc.com Web: www.elephant-cnc.com
    --------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

How To Set Woodworking CNC Router Controlled By DSP A11

How To Set Woodworking CNC Router Controlled By DSP A11