Automated Probing: SmartScreens for Mach3 with a Triple Edge Finder

[MyGarageShop]

I never wanted to have that sinking feeling after hours and hours of setup and run time only to find a problem had occurred. Then fixing the issue and spending ridiculous amounts of time trying to find your starting position.

Then I found the Triple Edge Finder...
The Makers Guide - Triple Edge Finder - THE MAKERS GUIDE

But then me being me my 28 years of machine control software background kept gnawing at me to write and Automated Probing routine... So here it is.

Let me know your thoughts



Mike
Some of my projects
https://mygarageshop.com/

YouTube Channel:
https://www.youtube.com/user/MyGarag...nnel/playlists

Similar Threads:

• Solved MACH3, How to Make " Edge Finder "
• Can someone share triple edge finder vb script
• SmartScreens for Mach3
• Need Help!- Fusion 360 post processor for 4th axis - Prize for help - Triple Edge Finder
• The Makers Guide Triple Edge Finder

[tom o]

It needs the volume turned up I'll have to watch it later.

[MyGarageShop]

If you have any questions after watching it feel free to message me

You can try it out here
https://ngeneyes.com/smartscreen/licensing/