Desktop ver 10.5


Results 1 to 3 of 3

Thread: Desktop ver 10.5

  1. #1


  2. #2

    Default Re: Desktop ver 10.5

    2nd clearing pass not aligning with the first pass...Its not the machine! Please Help!
    Have you verified that by looking at the G code and finding the misalignment there?

    If it looks correct in the preview then it isn't a code issue. Look elsewhere.



  3. #3
    Member MillAlien's Avatar
    Join Date
    Dec 2018
    Location
    Cook
    Posts
    16
    Downloads
    0
    Uploads
    0

    Default Re: Desktop ver 10.5

    Quote Originally Posted by kasari62 View Post
    2nd clearing pass not aligning with the first pass...Its not the machine! Please Help!
    I recently had a similar problem on multi-pass clearing paths in which had errant Z-axis step-downs.

    To make a very long story short - the issue was resolved by a firmware update. Along the way, I used a 3rd party simulator to rule out g-code issues, aligned the machine, and repeatedly ran test toolpath cases using two different jobs to rule out speed/feed as the source of the mischief.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Desktop ver 10.5

Desktop ver 10.5