Drag the part around to see the other areas. Hold down Left and Right mouse buttons together while dragging.
Vcarve Pro 8.5
when I zoom in on the 3D Preview screen to see how everything is looking the software will only zoom in on one area and I am not able to move the zoomed area around the work.
How can I zoom in on the top, sides, and bottom?
I've used Vectric for years and just put up with it, but now I'm working on a 16 x 20" MDF sign and need to see all parts of the sign to insure it is all good rather than cutting it then find out there is a problem in a certain section. Especially when there is different text size and different fonts.
Thanks,
HH
Similar Threads:
Drag the part around to see the other areas. Hold down Left and Right mouse buttons together while dragging.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Thanks Gerry and to think I have been struggling and putting up with this issue for 10 + years, LOL.
Good to see you stil around giving good advice.
Hager