Just In Boxjoint Gadget


Results 1 to 2 of 2

Thread: Boxjoint Gadget

  1. #1
    Registered jimandi's Avatar
    Join Date
    Nov 2013
    Location
    USA
    Posts
    5
    Downloads
    4
    Uploads
    0

    Default Boxjoint Gadget

    Hello All,

    I have VCarvePro ver 7.5 and have built a gadget. The gadget lays out each side of the box joint on named layers and generates two (2) tool paths, one for each hand (side) of the box joint. I have added a help screen and a PDF to show how to config the material setup.

    Please have a look and let me know your thoughts. I am looking for feedback on what I can add to the gadget.

    Note:
    I have add a mounting system to the end of my mill to hold the material in a vertical position. This will hold the material so that I can mill on the edge or end of the stock.

    I am working on a Dovetail version and should have the first version out in two weeks. let me know if you would like to see that too.

    Have a great day,
    Jim in Houston Texas

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Boxjoint Gadget-box-joint-gadget-pdf   Boxjoint Gadget-capture8-jpg  
    Attached Files Attached Files


  2. #2
    Member bsultan's Avatar
    Join Date
    Mar 2019
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Boxjoint Gadget

    Thank for the info. i have vcarve pro 7.5 and i cannot find the exe file for box joint anywhere.
    they have it for vrsion 9 but not for 7.5. any hints???
    thanks



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Boxjoint Gadget

Boxjoint Gadget