Help building my own large Vacuum forming machine 4x12 feet

Results 1 to 1 of 1

Thread: Help building my own large Vacuum forming machine 4x12 feet

  1. #1
    Sunnysign's Avatar
    Join Date
    Nov 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Help building my own large Vacuum forming machine 4x12 feet

    Hi all,
    Need to DIY a 12x4 ft with 1 ft. draw Vacuumforming machine at tight budget.
    In India, thick sheet forming machine Mfrs. are rare,and they quote exorbitant prices, adding 'trial and error' expenses, since no experience.
    I studied this machines quite a lot Online and working models: Thick-sheet forming is comparatively slow cycle and seems less complicated (?), hence hope to get fabricated by involving metal fabrication, pneumatic and Oven people.

    2mm PETG or 3mm Acrylic digital/Screen printed will be mostly used.

    1. Can anybody help with a simple design ?

    2. Heater: Quartz is best but cannot afford at such size. Can I use Kanthal wire, or Rod heater a must ?

    3. Cam-shell (Lid opening model) is possible or Heater frame up and down or sliding ?

    4. Pneumatic or hydraulic for Heater tray, die movements ?

    Even smallest tips are valuable, please help.

    Thank you for the time.



  2. #2
    *Registered User* FormV's Avatar
    Join Date
    Nov 2018
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Re: Help building my own large Vacuum forming machine 4x12 feet

    Hey.
    If you need the most cheap, then throwing the frame.

    The table is made of plywood 12 mm.
    The case of heating from a stainless steel or other metal.
    As a heating element 500W spiral with ceramic beads.
    Video




  3. #3
    Member
    Join Date
    Jul 2007
    Location
    Canada
    Posts
    1602
    Downloads
    5
    Uploads
    0

    Default Re: Help building my own large Vacuum forming machine 4x12 feet

    I like the vacuum former in the video. It is a nice simple design.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Help building my own large Vacuum forming machine 4x12 feet

Help building my own large Vacuum forming machine 4x12 feet