The disk drive power connectors in the PC will have +5v, +12v, and ground connections on it. You can get a drive power extension cable, clip off the side you don't need, and use that to gain access to the power lines you need.
Hello to all I am trying to add a manual pulse generator to my cnc router via parallel port. I installed a 2nd pci parallel port card to my pc and I have the pinout for the mpg. I just dont know how to get the 5v and 0v from the pc to the mpg here is the pinout and mpg I have
Similar Threads:
The disk drive power connectors in the PC will have +5v, +12v, and ground connections on it. You can get a drive power extension cable, clip off the side you don't need, and use that to gain access to the power lines you need.