- Serial communication cable parameters
-
Registered
Serial communication cable parameters
Welcome friends,, I hope you all are perfect
I am asking for any guide or instructions to set the right communication parameters (port setup) such as speed, bits n' parity,.... on both the PC and the machine controller. Taken into consideration that the communication using RTC & CTS communication device. .The machine is Egar250 - zBAVELLONI
Thank you in advance
Similar Threads:
-
- Serial communication cable parameters
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules