pci parallel port

Results 1 to 3 of 3

Thread: pci parallel port

  1. #1
    Registered
    Join Date
    Jan 2015
    Posts
    13
    Downloads
    0
    Uploads
    0

    Default pci parallel port

    Sorry if repetitive: I am wondering if there are any problems/gotchas with using a PCI-parallel port card to output from the PC to the Gecko 540.
    It's danged hard to find any older computer (that I would want to own!) that has a native parallel port anymore.

    Steve

    Similar Threads:


  2. #2
    Member
    Join Date
    May 2017
    Location
    Macedonia, The Former Yugoslav Republic Of
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: pci parallel port

    it will work if you enter the right hex address of the pci card lpt port. example pci parallel port-untitled-jpg

    Attached Thumbnails Attached Thumbnails pci parallel port-untitled-jpg  


  3. #3
    Member
    Join Date
    Nov 2013
    Posts
    4280
    Downloads
    0
    Uploads
    0

    Default Re: pci parallel port

    Hi,
    PMDX sell a PCI to parallel card for CNC use.

    Craig

    Last edited by joeavaerage; 03-08-2020 at 08:29 PM.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

pci parallel port

pci parallel port