RFQ: 16guage mild steel plasma cut "plaques" QTY 10+

[HalfRapid]

Hello,

Don't have access to a plasma cutter and waterjet is pretty slow.

2" x 10" mild steel 16quage with a name 11 characters long. Simple and will send you DXF. Will need at least 10.

Shipping will be to MN

Would like a 3week turn around time

Thanks much!

Regards,
Ben

Similar Threads:

• RFQ - Waterjet or Laser Mild Steel Plates, Qty 4
• plasma cut 20X pieces mild steel 1/2"
• RFQ - 1/4" mild steel plasma or waterjet
• mild steel panels needed: 28" x 18" x 0.125" and 13.75 x 23.625 x 14ga
• RFQ - on 1/2" mild steel plate

[XYZ-ABC]

Good morning,

Please email the DXF to: lee@elevatedmanufacturingsolutions.com
and I will get back to you with a quote as soon as possible!

Thank you,

Lee Ort
Elevated Manufacturing Solutions
Elevated Manufacturing Solutions
1-844-MFG-GURU

[krystalzou]

Hi Ben,

This is Krystal here, please send me the STEP file, then I can send you an offer soon.

Look forward to hearing from you soon.

Best Regards,
Krystal
Shenzhen Going Rapid prototype Co., Ltd.
krystalzou@going-rapid.com