Need 20 small steel blocks with 2 counterbore holes each


Results 1 to 10 of 10

Thread: Need 20 small steel blocks with 2 counterbore holes each

  1. #1
    Member dave148's Avatar
    Join Date
    Mar 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Need 20 small steel blocks with 2 counterbore holes each

    Please quote price and availability for the CNC fabrication of 20 pieces of the block with two counterbore holes shown in the attached files. The partfiles.zip contains four part files:
    MountingBlockForPlates-From1in-NoThreads.ipt
    MountingBlockForPlates-NormalDim-NoThreads.stp
    MountingBlockForPlates-NormalDim-NoThreads.ipt
    MountingBlockForPlates-From1in-NoThreads.stp

    The "MountingBlockForPlates-NormalDim-NoThreads" is the preferred version, but I included a 1x1xA version in case that will be significantly cheaper
    to make

    The .ipt and .stp alternates are for convenience, and should be equivalent.
    I am looking for +/- 0.005" tolerance or better, but the only real critical dimension is the hole spacing
    A36 steel
    Finish: nothing special

    Dave

    Similar Threads:
    Attached Files Attached Files


  2. #2
    Member
    Join Date
    Aug 2010
    Location
    usa
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default

    Hello I'm interested. Budget345@yahoo.com.



  3. #3
    Member
    Join Date
    Feb 2006
    Location
    USA
    Posts
    196
    Downloads
    0
    Uploads
    0

    Default Re: Need 20 small steel blocks with 2 counterbore holes each

    Dave,
    What is your email to send the quote?

    Doug Pryor
    David Wolfe Design, Inc.
    Akron, OH
    www.davidwolfedesign.com
    depryor@davidwolfedesign.com


  4. #4
    Member dave148's Avatar
    Join Date
    Mar 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Need 20 small steel blocks with 2 counterbore holes each

    Quote Originally Posted by dpryor View Post
    Dave,
    What is your email to send the quote?
    Reply to the note I sent to your yahoo email address



  5. #5
    Member
    Join Date
    Aug 2012
    Location
    United States
    Posts
    35
    Downloads
    4
    Uploads
    0

    Default Re: Need 20 small steel blocks with 2 counterbore holes each

    Good morning Dave,

    Please send me your email to: lee@elevatedmanufacturingsolutions.com and I will send you a quote back this afternoon.

    Thank you,

    Lee Ort
    Elevated Manufacturing Solutions
    Elevated Manufacturing Solutions
    1-844-MFG-GURU



  6. #6
    Member
    Join Date
    Mar 2017
    Location
    United States
    Posts
    0
    Downloads
    0
    Uploads
    0

    Default Re: Need 20 small steel blocks with 2 counterbore holes each

    Hello Dave,
    Please send me your email so I can also provide you with a quote. Thank you.
    vanguardmachineinc@gmail.com



  7. #7
    Member dave148's Avatar
    Join Date
    Mar 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Need 20 small steel blocks with 2 counterbore holes each

    Quote Originally Posted by XYZ-ABC View Post
    Good morning Dave,

    Please send me your email to: lee@elevatedmanufacturingsolutions.com and I will send you a quote back this afternoon.

    Thank you,

    Lee Ort
    Elevated Manufacturing Solutions
    Elevated Manufacturing Solutions
    1-844-MFG-GURU
    The email bounced with the error below. It looks to be yahoo related. I have seen problems emailing yahoo addresses in the past.

    <lee@elevatedmanufacturingsolutions.com>: host
    mx-biz.mail.am0.yahoodns.net[67.195.204.83] said: 421 4.7.0 [TSS04]
    Messages from 69.89.20.237 temporarily deferred due to unexpected volume or
    user complaints - 4.16.55.1; see
    https://postmaster.verizonmedia.com/error-codes (in reply to MAIL FROM
    command)



  8. #8
    Member
    Join Date
    Aug 2012
    Location
    United States
    Posts
    35
    Downloads
    4
    Uploads
    0

    Default Re: Need 20 small steel blocks with 2 counterbore holes each

    Dave,

    Please try and send it to: elevatedmanufacturing@gmail.com

    Thank you,

    Lee Ort
    Elevated Manufacturing Solutions
    Elevated Manufacturing Solutions
    1-844-MFG-GURU



  9. #9
    Member dave148's Avatar
    Join Date
    Mar 2021
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Need 20 small steel blocks with 2 counterbore holes each

    Quote Originally Posted by dpryor View Post
    Dave,
    What is your email to send the quote?
    Sorry, I confused you with someone else in my reply about the yahoo email address.
    This one is gone now. I didn't have much time to collect quotes this time. I'll try to get the RFQ out at least a week ahead of the deadline next time.
    Dave



  10. #10

    Default Re: Need 20 small steel blocks with 2 counterbore holes each

    Hi Dave,

    Maybe this contact is too late for you.
    But still want to let you know that we have Instant Quote,
    If you need a price for your reference,just simply upload your files that you will get a price and lead time in few seconds.

    Step 1 :Upload your 3D drawing in STP files

    Step 2 :Choose the material, process, heat treatment, surface finish, quantity

    For more detail please kindly visit: https://www.xmake.com/
    And my email is adela@xmake.com

    Best Regard
    Adela



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need 20 small steel blocks with 2 counterbore holes each

Need 20 small steel blocks with 2 counterbore holes each