Hi Adam, your mbox is full...
Just taking a stab here that someone might be able to make a spindle screw (#132) that is no longer available from the manufacturer for purchase, making the lathe useless. I would assume it's hardened and unfortunately I do not have a drawing of the part. The screw would need to be sent for duplication.
Please let me know what information you would need to give me an idea of cost to reproduce.
Thanks.
Adam,
Similar Threads:
G540, Rack and Pinion Drives-X/Y axis, 1/2-Ball Screw-Z Axis w/THK HSR 25 Linear Slides, Steppers KL23H2100-35-4B, Power Supply-KL-600-48
Hi Adam, your mbox is full...
Project completed.
Thanks,
G540, Rack and Pinion Drives-X/Y axis, 1/2-Ball Screw-Z Axis w/THK HSR 25 Linear Slides, Steppers KL23H2100-35-4B, Power Supply-KL-600-48
FYI to CNCZone Community - the ballpark $20 is a DIY solution (had to say that before somebody says I was posting a (Quote price)