Need 1/2" bar threaded on end x 100


Results 1 to 4 of 4

Thread: Need 1/2" bar threaded on end x 100

  1. #1
    Registered
    Join Date
    May 2007
    Location
    USA
    Posts
    122
    Downloads
    0
    Uploads
    0

    Default Need 1/2" bar threaded on end x 100

    2.5" OAL CR 1018 steel round, .350" of 1/2-20 threads on one end. I will be screwing a nut onto the threads and welding on to them. Qty 100 per order to start, this will be a regular order. Off the shelf cold rolled round bar is fine. +- .020" on length.

    Respond to qualitymachinesales@gmail.com with a quote and TRUE time line. Late shipping is not acceptable.

    Thank you.

    JIM

    Similar Threads:
    Last edited by Thinwater; 09-22-2018 at 01:26 PM.


  2. #2
    Member cooperjm's Avatar
    Join Date
    Sep 2009
    Location
    USA
    Posts
    135
    Downloads
    0
    Uploads
    0

    Default Re: Need 1/2" bar threaded on end x 100

    Jim

    I sent you a message but it was rejected.



    Sent from my SM-G955U using Tapatalk



  3. #3
    Registered
    Join Date
    May 2007
    Location
    USA
    Posts
    122
    Downloads
    0
    Uploads
    0

    Default Re: Need 1/2" bar threaded on end x 100

    E mail addy fixed. The "U" on my computer wont work 1/2 of the time.



  4. #4
    Registered
    Join Date
    May 2007
    Location
    USA
    Posts
    122
    Downloads
    0
    Uploads
    0

    Default Re: Need 1/2" bar threaded on end x 100

    The job has been awarded, thanks all who replied.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need 1/2" bar threaded on end x 100

Need 1/2" bar threaded on end x 100