Need 1/2" bar threaded on end x 100
Registered
Need 1/2" bar threaded on end x 100
2.5" OAL CR 1018 steel round, .350" of 1/2-20 threads on one end. I will be screwing a nut onto the threads and welding on to them. Qty 100 per order to start, this will be a regular order. Off the shelf cold rolled round bar is fine. +- .020" on length.
Respond to qualitymachinesales@gmail.com with a quote and TRUE time line. Late shipping is not acceptable.
Thank you.
JIM Similar Threads:
Last edited by Thinwater; 09-22-2018 at 01:26 PM .
Member
Re: Need 1/2" bar threaded on end x 100
Jim
I sent you a message but it was rejected.
Sent from my SM-G955U using Tapatalk
Registered
Re: Need 1/2" bar threaded on end x 100
E mail addy fixed. The "U" on my computer wont work 1/2 of the time.
Registered
Re: Need 1/2" bar threaded on end x 100
The job has been awarded, thanks all who replied.
Need 1/2" bar threaded on end x 100
Tags for this Thread
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules