Looking for 25pcs of each
Looking for 2 parts to be made from 6061. Both are pretty small.
Tolerances are +/- .002 with the exception of the bearing pockets (see picture). Bearing pockets I would like to hold +/- .0001.
Both pieces are to be made from .0625" +/- .005.
These can have a mill finish as they will be sand blasted.
All I have are the picture and a .dxf. Hopefully you can work with these.
Please email me at erikdye@gmail.com. Please no PM's on here.
Let me know if I forgot anything and thanks for looking.
Similar Threads:
Looking for 25pcs of each
The problem with quoting is that they are very thin parts and not easily held, the DXF files need a lot of help and pretty small quantities.