Mark up the material 25%-50%, and charge somewhere in the neighborhood of $100/hour
This is my first job and I'm not entirely sure what to quote. It's a pair of triple trees. Stock size is 12'' L x 5'' W x 2'' Thick. The fork hole size is 43mm.
What would you charge for a job like this? It's just 1 pair, not a production run. I have material costs already, but just not sure what to charge for machine time and my design time. I would like this to be a win win for the customer and myself. What would be a competitive rate to charge?
I'm located in So. California, near Irwindale. I apologize in advance if i'm missing something you need to quote this, please let me know whatever you need! Thanks!
Thanks in advance for your help!
Similar Threads:
Mark up the material 25%-50%, and charge somewhere in the neighborhood of $100/hour
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Because there’s no quantity I’d say about $500 each plus material. That’s without know exact specs and whatnot. Maybe I could make it cheaper maybe I can’t that’s just my guess from reviewing it quickly.