What type of black finish are you referring to? What kind of tolerances do you require?
G28Machining.com
G28machining@gmail.com
Sent from my SM-G955U using Tapatalk
I need 50 of these plates to start with as soon as possible. I should be needing more of these and a couple of different variations soon after. If possible I would like them in a black finish, but I can get them finished locally if it would be too much of a delay. This is a finished part, so I need smooth edges.
5.15 x .250 in 6061 Aluminum Plate
.35 in holes and slots
Holes need countersink to .60 in wide.
No rough edges (give me options)
50 parts with more to follow
Black finish preferred.
Quote raw & black finish if possible.
Thank you.
Similar Threads:
What type of black finish are you referring to? What kind of tolerances do you require?
G28Machining.com
G28machining@gmail.com
Sent from my SM-G955U using Tapatalk
I’m looking at either a gloss black powder coat or a black anodized finish. I’m open to suggestions.
Im thinking +/- .005. Its a pretty basic bracket to bolt two parts together.
Ok, I will put a quote together for you.
Sent from my SM-G955U using Tapatalk
Pm Sent.
Thanks, Matt Mittler
Mittler Machine Works
matt@mittlermachineworks.com
Cnc Machining | Newmarket | Mittler Machine Works
PM sent
Over 15 year in cnc machining parts business.CNC Turning, Milling, Drilling, Planning, Grinding, Welding ./www.plusminusthree.com Email?kon@plusminusthree.com
PM sent.
PM sent.
Thanks,*
Attila*Kovacs*
Supreme Leader*
206-669-3524*
attila@birchmfg.com*
3400 N Arizona Ave Ste 110*
Chandler, AZ 85225*
Sent from my MHA-L29 using Tapatalk
PM sent
This job has been awarded. Thanks.