Small stainless parts with threaded holes


Results 1 to 2 of 2

Thread: Small stainless parts with threaded holes

  1. #1
    Member
    Join Date
    Nov 2010
    Location
    USA
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default Small stainless parts with threaded holes

    Looking for 100-400pcs of these out of 303, 316, 304 or whatever is easiest.

    All tolerances can be +/- .005" except the center which needs to be held at +/-.001 for a nice tight slip fit on a 8mm shaft.

    Please email me at erikdye@gmail.com. PMs dont work so good for me on here.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Small stainless parts with threaded holes-0-offset-hub-fixed-jpg  


  2. #2
    Member
    Join Date
    Nov 2010
    Location
    USA
    Posts
    64
    Downloads
    0
    Uploads
    0

    Default Re: Small stainless parts with threaded holes

    This job has been filled. Thank you!



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Small stainless parts with threaded holes

Small stainless parts with threaded holes