Small Aluminum Production Parts... Small VMC work

[Neuxstone]

Production Parts Already been thru Prototyping
Quantities 100(sooner)-5000(later)
Parts drawn in both Acad 2018LT and Fusion 360 Can post but no tool library...
DEPENDABLE ACCURATE CHEAP,( in that order...)
BOTTOM PIECE IS TWO IDENTICAL PARTS MATED...(3pc. per ASSY)
Please promptly reply Posting a 2-d JPG.

PM me for phone#
Thanks, Dave

Similar Threads:

• Small aluminum parts- lathe work with cross drill/thread - reoccurring orders
• 1,000-5,000 piece production turning - Small Parts - RFQ
• Setting up Small Production of Aluminum parts via Electromagnet
• Small Aluminum Parts Mill Work
• RFQ 4 parts(prototyping asnd small production run)

[konwey]

Has Pm

[cooperjm]

Production Parts Already been thru Prototyping
Quantities 100(sooner)-5000(later)
Parts drawn in both Acad 2018LT and Fusion 360 Can post but no tool library...
DEPENDABLE ACCURATE CHEAP,( in that order...)
BOTTOM PIECE IS TWO IDENTICAL PARTS MATED...(3pc. per ASSY)
Please promptly reply Posting a 2-d JPG.

PM me for phone#
Thanks, Dave

Pm sent

Sent from my SM-G955U using Tapatalk

[mtparker18]

PM sent

[KeljenTech]

I'd be happy to send you a quote for these assemblies
Please send me a address to forward to thanks

Ken Webb

keljentech@hotmail.com

[ModernAlbany]

Production Parts Already been thru Prototyping
Quantities 100(sooner)-5000(later)
Parts drawn in both Acad 2018LT and Fusion 360 Can post but no tool library...
DEPENDABLE ACCURATE CHEAP,( in that order...)
BOTTOM PIECE IS TWO IDENTICAL PARTS MATED...(3pc. per ASSY)
Please promptly reply Posting a 2-d JPG.

PM me for phone#
Thanks, Dave

Have you found some one to do your job? If not
I would like more info, thanks Darrell
Modern Machine Works inc.
1-541-401-1453
Matt@Modernmachinecorp.com