looking for a CNC turning shop- small run lots mill turn a plus

[cnctoolman]

looking for a shop that does small lot runs of CNC turning,. Mainly aluminum, some copper. tolerances are not tight at all. nothing tighter than +/- .003. capabilities of milling while in the machine a plus but not necessary. Lot sizes usually range 300pcs at a time, multiple times a year. Most of the sizes are 1" and under on diameter and max length of 2". Have a family of parts. Prefer east coast, due to shipping, but open to all. if interested will send prints, just let me know where.

Thanks

Similar Threads:

• Need Help!- small shop looking for cnc mill and lathe
• MachStdMill Turn and Mill-Turn Announcement
• machine shop to turn an R8 taper
• Need Help!- newbie looking for advise on getting cnc mill for small shop

[MasterMind13]

Pm sent

[cnctoolman]

a couple emails supplied are bouncing back due to the email addresses, and cant respond to some of the pm's as not able to or inbox's full just to let some know.

[cnctoolman]

job has been place with a vendor on here.

Thanks to all.