Stepper Driver Board

Results 1 to 2 of 2

Thread: Stepper Driver Board

  1. #1
    *Registered User* hbcreative's Avatar
    Join Date
    Aug 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Stepper Driver Board

    Hi All ... looking for some advice from the technically advanced here. I have a CNC Shark Pro from Next Wave Automation. The machine has been awesome. Recently I replaced the stepper motors and the direction of travel was reversed on all of them. I took some bad advice and switched some wires to reverse it and fried the driver board. I've since learned you can make the changes in the software. Problem is the driver board is no longer made so I have to replace it with something different. Wondering if anyone can recommend one? 3 axis, power supply is 24V 6.5amp. I'm not an electronics guy, just a simple cabinetmaker but I really miss this machine, it has served me so well for the past 7 years. Any help or recommendations would be greatly appreciated. Thanks in advance

    Similar Threads:


  2. #2
    Member
    Join Date
    Dec 2017
    Location
    United States
    Posts
    82
    Downloads
    0
    Uploads
    0

    Default Re: Stepper Driver Board

    The best way is to contact to manufacturer.

    if not I can change the controller to new one.

    email me mattcnc@protonmail.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Stepper Driver Board

Stepper Driver Board

Stepper Driver Board