Originally Posted by
notselrach
I am confused. Config settings are not controlling my router. Output settings: the router relay runs off pin 17. First, I don't know if should be wired "normally open" or "normally closed". The relay is powered as soon as I turn on the machine and will not turn off So, I don't know which switch in the config. turns it off. If I look at diagnostics I see the correct led is lit to switch on the router. If I switch the wiring on the relay to normally open then the rpoutret will not start. The other axes work fine. So, I know this is an output setting somewhere in the config. Help! (This machine was working fine until I disassembled it and got it running in a different location.)