Ooznest Workbee Z-axis wobble in carriage?

[Jayson_2016]

I'm getting about 5 degrees of wobble perpendicular to the X axis in the carriage, is this normal? Everything is tight as far as I can tell, but also according to the instructions you assemble the carriage without the ability of the stop switch to engage by hitting the frame at max extrusion... I'll upload a video as soon as it finishes processing on my computer.

Similar Threads:

• Need A Quote- Looking for Mounting Brackets for Dewalt 618 on an Ooznest CNC Workbee.
• New Machine Build- Issue with A-axis on Chinese Workbee Stb5100
• Need Help!- Acme lead screw Y-axis wobble - what to do?
• Z Axis Wobble in Acme Thread - Help Please
• Need Help!- wobble when i move the y axis...how to diagnose/fix

[difalkner]

Have you contacted Workbee about this?

David

[Jayson_2016]

I haven't yet no, I wanted to see if this is a normal thing for the CNC machine or not.

[routalot]

I haven't yet no, I wanted to see if this is a normal thing for the CNC machine or not.

It shouldn't be normal.Is a fastening loose or are you expecting the machine to work beyond it's capabilities?