Hitachi Seiki Service and Support!!!!!!!!1


Page 1 of 14 123411 ... LastLast
Results 1 to 12 of 168

Thread: Hitachi Seiki Service and Support!!!!!!!!1

  1. #1
    Registered Hitachi_man's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Exclamation Hitachi Seiki Service and Support!!!!!!!!1

    Hello all out there lost in the confusion of trying to find support for your Hitachi Seiki machines. I own a CNC Service Company in Wichita Kansas working on all brands of machines, but specializing in Hitachi Seiki. I currently have over 10 gig of info on Hitachi Seiki machines in my database from machine software to procedures and ELECTRICAL MANUALS!!!!! I have years of experience working with these machines, and until June of 04 I worked for Mori Seiki in LA as the Hitachi Seiki specialist. We DO travel, and my hourly rate for shop labor is only $75.00 per hour no matter what state your in. I also do phone support and provide procedures at $45.00 per hour 1 hour min....If you have a Hitachi Seiki machine, other machine models welcome also, call us and we will be happy to help!!! (cureing your headaches is free!!)

    You can contact us at 316-744-0549 just ask for Josh, aka Hitachi_man

    well be looking forward to hearing from you!!!

    Similar Threads:


  2. #2
    Registered
    Join Date
    Mar 2005
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Hi Hitachi Seiki_Man
    I Have Hitachi Seiki Va 40 Can You Help Me Look For Manual.
    I live in orange county california
    Thank You



  3. #3
    Registered Hitachi_man's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Manual

    What controls?



  4. #4
    Registered
    Join Date
    Mar 2005
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Hitachi Seiki va 40
    Fannuc 6m control.
    If you are still in LA let me know so I can contac you for service

    Thank you



  5. #5
    Registered Hitachi_man's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default

    I'm in the midwest now. your machine have the Micon 8-1 or 8-2?



  6. #6
    Registered
    Join Date
    Mar 2005
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    Hi,hitachi_man
    How do i know which is 8-1 or 8-2?

    Thanh You



  7. #7
    Registered Hitachi_man's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default

    It's on the edge of the board, it will say micon 8-1 or micon 8-2.



  8. #8
    Registered
    Join Date
    Mar 2005
    Location
    USA
    Posts
    5
    Downloads
    0
    Uploads
    0

    Default

    It's micon 8-2.



  9. #9
    Registered Hitachi_man's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default

    What manuals are you looking for? I'll see if I have them.



  10. #10
    Registered
    Join Date
    Nov 2003
    Location
    Gardnerville, NV
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default how to reset magazine sync

    HG 400III with Seicos 10M control. Tool mag is out 5 pots. How can I reset?

    Kirk


  11. #11
    Registered Hitachi_man's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default

    That machine should have the Micon 16 front end, to reset the tool pot you need to go into the system table and do it there. Press F1 > F4 and that will take you into the AB-Phase table. Change your pot numbers there and reboot the machine. That should take care of it.



  12. #12
    Registered Hitachi_man's Avatar
    Join Date
    Nov 2004
    Location
    USA
    Posts
    36
    Downloads
    0
    Uploads
    0

    Default Phone number change!!!

    Phone number change....[QUOTE=Hitachi_man]Hello all out there lost in the confusion of trying to find support for your Hitachi Seiki machines. I own a CNC Service Company in Wichita Kansas working on all brands of machines, but specializing in Hitachi Seiki. I currently have over 10 gig of info on Hitachi Seiki machines in my database from machine software to procedures and ELECTRICAL MANUALS!!!!! I have years of experience working with these machines, and until June of 04 I worked for Mori Seiki in LA as their Hitachi Seiki specialist. We DO travel, and my hourly rate for shop labor is only $75.00 per hour no matter what state your in. I also do phone support and provide procedures at $45.00 per hour 1 hour min....If you have a Hitachi Seiki machine, other machine models welcome also, call us and we will be happy to help!!! (curing your headaches is free!!)

    You can contact us at 316-260-6090 just ask for Josh, aka Hitachi_man

    well be looking forward to hearing from you!!!



Page 1 of 14 123411 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hitachi Seiki Service and Support!!!!!!!!1

Hitachi Seiki Service and Support!!!!!!!!1

Hitachi Seiki Service and Support!!!!!!!!1