Hitachi Seiki Service and Support!!!!!!!!1 - Page 4


Page 4 of 14 FirstFirst 1234567 ... LastLast
Results 37 to 48 of 168

Thread: Hitachi Seiki Service and Support!!!!!!!!1

  1. #37
    Registered
    Join Date
    Feb 2007
    Location
    Canada
    Posts
    45
    Downloads
    0
    Uploads
    0

    Default orphans

    well at least his phone # is there, maybe he still answers that? Must be a busy man



  2. #38
    Registered
    Join Date
    Feb 2007
    Location
    Canada
    Posts
    45
    Downloads
    0
    Uploads
    0

    Default

    and his phone # is disco now too. Is this guy still alive?



  3. #39
    Registered
    Join Date
    Mar 2007
    Location
    UK
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Hs 630

    Hello Hitachi Man,

    My company currently employs a HS630 Horizontal Machining Cell, for which we have no user manual (an external repair company took it with them after a job!).

    I have been asked to look into the operating pressures of our machines and review these to see if we are over-pressurising unnecessarily.

    I would therefore be most grateful if you could provide me with any information that you deem to be relevant.

    Kind Regards,


    (CNC KPM)



  4. #40
    Registered
    Join Date
    Feb 2007
    Location
    Canada
    Posts
    45
    Downloads
    0
    Uploads
    0

    Default

    hes not answering in here, not returning email and his phone has been disconnected. I am thinking he is stuck in a lathe somewhere.........



  5. #41
    Registered
    Join Date
    Oct 2006
    Location
    INDIA
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Hello,
    HITACHI SEIKI VM50 , NOW RETROFITED WITH FANUC O i SYSTEM, EXCEPT SPINDLE DRIVE REST ARE OK.
    I HAVE 0-10V ANLOG COMMAND PROVISON FROM SYSTEM.
    DOES ANY ONE KNOW HOW TO INTERFACE THIS WITH NEC SPINDLE DRIVE. ASU110.
    A HELP REQUESTED. IF POSSIBLE PLEASE GIVE SCHEMATIC FOR THIS INTERFACE.
    D.JOHNSON - a-electronics@eth.net



  6. #42
    Registered
    Join Date
    Jul 2007
    Location
    USA
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default Hitachi Seiki Minimatic Service and Support !!

    I am trying to locate "Josh" AKA Hitachi_man from this Nov 2004 post.... or anyone else with equivalent experience that may be able to provide phone support specifically for a Hitachi Seiki MN 500, Horizontal Machining Center "Minimatic" with Fanuc 6M control.

    We are having trouble with the tool changer. We're located in Columbus, OH and we're also interested in developing a relationship with an experienced Hitachi Seiki repair-person who would be able to travel to our location.

    Please contact us via phone or email (We do not check this forum regularly)

    dstacey[at]columbusmachine[dot]com
    614-409-0244



  7. #43
    Registered
    Join Date
    Nov 2003
    Location
    Gardnerville, NV
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default

    His website is www.kmtscnc.com - you can find his contact info there.
    Kirk

    Kirk


  8. #44
    Registered
    Join Date
    Aug 2007
    Location
    Romania
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default

    Hi. :-)

    We have a hitachi seiki ts15 made in year 1998, with cnc seikos sigma 21L (fanuc cnc? not sure).

    I only have service manual though
    Do you have any manuals for it? I'm interested in programing manual, worker's manual, etc... any manuals that can help me use the machine.

    Nick



  9. #45
    Registered
    Join Date
    Sep 2007
    Location
    UK
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Hi, This post of mine is very knowledgable and may enhance the information of the viewers , however I would like some specific information for myself. If someone can help me then please send me a private message. Best Regards,

    Aid & Trade Dropshippers | Wholesale Suppliers
    Property & Real Estate Directory | Australia Wholesalers and Dropshippers



  10. #46
    Registered
    Join Date
    Sep 2007
    Location
    UK
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default

    Hi, This post of mine is very knowledgable and may enhance the information of the viewers , however I would like some specific information for myself. If someone can help me then please send me a private message. Best Regards,

    Property & Real Estate Directory | Australia Wholesalers and Dropshippers



  11. #47
    Registered jbird68's Avatar
    Join Date
    Aug 2007
    Location
    USA
    Posts
    15
    Downloads
    0
    Uploads
    0

    Default

    For service in Northern Illinois/Southern Wisconsin try http://www.statemachinetool.com/ in Waukesha, WI.
    Their rates are:
    Labor = $125/hr - 1 hour min.
    Travel = $55/hr + $0.49/mile

    There is also http://www.ellisontechnologies.com/il/home.aspx
    Their rates are:
    Labor = $125/hr
    Travel = $125/hr
    If your Hitachi-Seiki was made in Huntsville, AL you won't be able to go to these guys. Ellison is part of Mori Seiki...who bought the Japanese portion of Hitachi-Seiki. Mori couldn't get the US Hitachi-Seiki line and therfore they won't support your machine if it was made in the US. If your serial number on your machine has letters at the end, it was made in the US and not in Japan.

    We ended up paying for 1/2 a service call. When the tech got here and saw the serial number with letters at the end (HT23J7909HL), he called his super at Mori and was told he could not support our machine. We still had to pay for his travel time to get here and back. He tried a few steps to get it fixed but they didn't work.

    They guys at State Machine faxed me a procedure and I had it fixed in a matter of minutes. We are still having State Machine come out and do an alignment and reset the Q-setter. This machine hasn't been re-aligned in years. I know it is out because the drills don't drill on-center anymore, I have to offset the X-Axis up about 0.040" in the tool offset page.



  12. #48
    Registered
    Join Date
    Jul 2004
    Posts
    169
    Downloads
    0
    Uploads
    0

    Default

    Thanks for the information! Your services will come in handy to many customers who have these machines and need service!



Page 4 of 14 FirstFirst 1234567 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Hitachi Seiki Service and Support!!!!!!!!1

Hitachi Seiki Service and Support!!!!!!!!1

Hitachi Seiki Service and Support!!!!!!!!1