Printable View
[QUOTE=;][/QUOTE]
Hello,
HITACHI SEIKI VM50 , NOW RETROFITED WITH FANUC O i SYSTEM, EXCEPT SPINDLE DRIVE REST ARE OK.
I HAVE 0-10V ANLOG COMMAND PROVISON FROM SYSTEM.
DOES ANY ONE KNOW HOW TO INTERFACE THIS WITH NEC SPINDLE DRIVE. ASU110.
A HELP REQUESTED. IF POSSIBLE PLEASE GIVE SCHEMATIC FOR THIS INTERFACE.
D.JOHNSON - [email]a-electronics@eth.net[/email]
I am trying to locate "Josh" AKA Hitachi_man from this Nov 2004 post.... or anyone else with equivalent experience that may be able to provide phone support specifically for a [B]Hitachi Seiki MN 500, Horizontal Machining Center "Minimatic" with Fanuc 6M control[/B].
We are having trouble with the tool changer. We're located in Columbus, OH and we're also interested in developing a relationship with an experienced Hitachi Seiki repair-person who would be able to travel to our location.
Please contact us via phone or email (We do not check this forum regularly)
dstacey[at]columbusmachine[dot]com
614-409-0244
His website is [url]www.kmtscnc.com[/url] - you can find his contact info there.
Kirk
Hi. :-)
We have a hitachi seiki ts15 made in year 1998, with cnc seikos sigma 21L (fanuc cnc? not sure).
I only have service manual though
Do you have any manuals for it? I'm interested in programing manual, worker's manual, etc... any manuals that can help me use the machine.
Nick
Hi, This post of mine is very knowledgable and may enhance the information of the viewers , however I would like some specific information for myself. If someone can help me then please send me a private message. Best Regards,
[url=http://www.aidandtrade.com]Aid & Trade Dropshippers[/url] | [url=http://www.dailytrader.com]Wholesale Suppliers[/url]
[url=http://www.propertydir.com] Property & Real Estate Directory [/url] | [url=http://www.australiawholesalers.com]Australia Wholesalers and Dropshippers[/url]
Hi, This post of mine is very knowledgable and may enhance the information of the viewers , however I would like some specific information for myself. If someone can help me then please send me a private message. Best Regards,
[url=http://www.propertydir.com] Property & Real Estate Directory [/url] | [url=http://www.australiawholesalers.com]Australia Wholesalers and Dropshippers[/url]
For service in Northern Illinois/Southern Wisconsin try [url]http://www.statemachinetool.com/[/url] in Waukesha, WI.
Their rates are:
Labor = $125/hr - 1 hour min.
Travel = $55/hr + $0.49/mile
There is also [url]http://www.ellisontechnologies.com/il/home.aspx[/url]
Their rates are:
Labor = $125/hr
Travel = $125/hr
If your Hitachi-Seiki was made in Huntsville, AL you won't be able to go to these guys. Ellison is part of Mori Seiki...who bought the Japanese portion of Hitachi-Seiki. Mori couldn't get the US Hitachi-Seiki line and therfore they won't support your machine if it was made in the US. If your serial number on your machine has letters at the end, it was made in the US and not in Japan.
We ended up paying for 1/2 a service call. When the tech got here and saw the serial number with letters at the end (HT23J7909[B]HL[/B]), he called his super at Mori and was told he could not support our machine. We still had to pay for his travel time to get here and back. He tried a few steps to get it fixed but they didn't work.
They guys at State Machine faxed me a procedure and I had it fixed in a matter of minutes. We are still having State Machine come out and do an alignment and reset the Q-setter. This machine hasn't been re-aligned in years. I know it is out because the drills don't drill on-center anymore, I have to offset the X-Axis up about 0.040" in the tool offset page.
Thanks for the information! Your services will come in handy to many customers who have these machines and need service!
Hi.
We have a hitachi seiki Vs50 (fanuc 18i ).
I need service manual,worker's manual, etc...
Who can help me? Please Email to me. :tongliana@126.com
tonglian
Also try [url]www.cybercnc.com[/url] the story I got from a guy is that the owner of this company put up his house and much more as collateral to purchase all of the [B]Hitachi-Sieki USA[/B] equipment. He bought up everything in the US. They might have manuals you are looking for also.
Hi,
Search on google for some second hand dealers of machines that have a machine like yours. Ask them if they have the manuals and what will be the cost to get them. I solved my problem once like that.
Regards,
Nick
Hi Hitachi man:
i am in China. There is a Hitachi Seiki VS50(Fanuc 18i)in our factory. It is second hand machine.But there is no manual of machine.Can you sale the manual to us?
Best Regards
tonglian(tongliana@163.com)
[QUOTE=;][/QUOTE]
Does anyone know what the monitor pinouts are on a HS VM40.
It has the Seicos control. It had a 12" monochrome CRT.
What are the pinouts on CR2-NK10 cable.
I'm trying to adapt this to a LCD monitor.
Thanks
I am looking for the Paramerters for a VA 55 Hitachi Seiki
[quote=Hitachi_man;54934]Hello all out there lost in the confusion of trying to find support for your Hitachi Seiki machines. I own a CNC Service Company in Wichita Kansas working on all brands of machines, but specializing in Hitachi Seiki. I currently have over 10 gig of info on Hitachi Seiki machines in my database from machine software to procedures and ELECTRICAL MANUALS!!!!! I have years of experience working with these machines, and until June of 04 I worked for Mori Seiki in LA as the Hitachi Seiki specialist. We DO travel, and my hourly rate for shop labor is only $75.00 per hour no matter what state your in. I also do phone support and provide procedures at $45.00 per hour 1 hour min....If you have a Hitachi Seiki machine, other machine models welcome also, call us and we will be happy to help!!! (cureing your headaches is free!!)
You can contact us at 316-744-0549 just ask for Josh, aka Hitachi_man
well be looking forward to hearing from you!!![/quote]
i bought cnc machine of spec:Hitachi Seiki HT25DM, Fanuc 11TT, Twin turret, C Axis, Top turret with live tools.(see attached pictures)
I recently installed this machine by giveing properly connection to this machine.
when i power on the machine then machine dnt give any alarm and machine is ready for operation except "inter fence check inneffective led power on"i mentioned red line to led of control panel" see picture of control panal.
I am not understanding this meaning may be it is safety but i dnt know how should i remove this.
Firstly i wana to know this becuase machine's is ready for operation but there is no axis moves.
Please advise me to solve this matter.
Best Regard,
Muhammad Nadeem Ashraf(nadeemash655@gmail.com)
[QUOTE=;][/QUOTE]
Dear All
I have a hitachi machine and facing following problem ,can any one help me to get a soft copy of pc ladle. following are the details.
Problem -- PLC DATA LOST ON HITACHI SEIKI HG500
Service Required -- A Soft Copy of PC LADLE.( We have a
communication software and cable for
uploading
Machine Details
Model--- HG500
CNC ---FANUC 15 MA
SR No --HG50229
PLC --- Hitachi Seiki make MICON 16 II
Specifications--- Normal
Ladle Program No---2741-A02T(Mentioned in the electrical diagram
book)
cncrepairs(cncepairs@rediffmail.com)
hi everyone. I would like to know how reliable is this company [url]www.cnc[/url] modellabau. I want to buy one of these machines but I have no experience buying in online shopping and so I would like to know if this company is ok and that I will not have any problems when I transfer the money to them. That they will uphold their end of the bargain.
thanks
* Edit
* Report
Hello all, FYI maybe this link could be useful [URL="http://cncfanuc.blogspot.com"]http://cncfanuc.blogspot.com[/URL]
Hi, is anybody able to help us with the procedure for resetting these parameters please?
We have a 1996 HITEC-TURN 23RIII type CNC LATHE that has had parameters disrupted by a flat NC controller backup battery, according to the parameter list the 9000 series numbers have been disrupted. However these seem to be protected and we cannot alter them back.
Does anybody know who we can contact for the correct procedure or password????????
[quote=nadlala;552684]i bought cnc machine of spec:Hitachi Seiki HT25DM, Fanuc 11TT, Twin turret, C Axis, Top turret with live tools.(see attached pictures)
I recently installed this machine by giveing properly connection to this machine.
when i power on the machine then machine dnt give any alarm and machine is ready for operation except "inter fence check inneffective led power on"i mentioned red line to led of control panel" see picture of control panal.
I am not understanding this meaning may be it is safety but i dnt know how should i remove this.
Firstly i wana to know this becuase machine's is ready for operation but there is no axis moves.
Please advise me to solve this matter.
Best Regard,
Muhammad Nadeem Ashraf(nadeemash655@gmail.com)[/quote]
I can solve your problem free of cost call me on 0091-9430737981 my mail id is = [email]prabhatmishra@mail.com[/email]