Bijur Metering Valve Installation

[Ivan_The_Red]

Hi All,

I've been looking for some installation instructions for Bijur FJB metering units and cant find anything anywhere, do they require teflon tape or pipe dope during installation?
Does anybody know what the torque values of the nuts are that collapse the sleeves around the plastic lines or are they tightened by the number of turns after being snugged hand tight?

Any advise would be greatly appreciated.

Thanks

Jeff

Similar Threads:

• Gate Valve, Butterfly Valve, Ball Check Valve, Float Valve Leading Supplier
• Bijur Metering inserts
• Pro/e (Creo) Valve/ Valve seat hard stop mechanism
• Interact 2 speed control valve problems (piloted 5 port 2 soleniod valve)
• Tire Valve / Shraeder Valve Dimensions

[the_gentlegiant]

This took me all of 30 seconds on google.

https://www.bijurdelimon.com/resource-library.html

Download the Single Line Resistance catalog and try page 16.

[Ivan_The_Red]

This took me all of 30 seconds on google.

https://www.bijurdelimon.com/resource-library.html

Download the Single Line Resistance catalog and try page 16.

Thanks, much appreciated