Need Help! Machine Zero


Results 1 to 4 of 4

Thread: Machine Zero

  1. #1

    Default Machine Zero

    Hi

    We have a Taiwan Takisawa 110 lathe with system fanuc series 21i-TA
    the issue with it now is that when we changed the batteries in the machine, the machine zero point has been moved
    how do we change the machine zero point manually?

    Similar Threads:


  2. #2
    Member Jacqueslubbe's Avatar
    Join Date
    Sep 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default

    I have a similar problem with my machine and it uses Fagor software hope some one can help



  3. #3
    Member Algirdas's Avatar
    Join Date
    Mar 2009
    Location
    United Arab Emirates
    Posts
    1982
    Downloads
    2
    Uploads
    0

    Default Re: Machine Zero

    Did you checked all the rest machine settings? It's very easy to lose all parameters when replacing the battery wrong way on Fanuc 21i-TA.



  4. #4

    Default Re: Machine Zero

    all the machine settings looks fine, exept the x-axis is wrong with about 30mm on the diameter. We dont know which parameter you can change that on. so we are wondering if anyone know which one?



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Machine Zero

Machine Zero