cnc 1200 - 1200 mm need help


Results 1 to 2 of 2

Thread: cnc 1200 - 1200 mm need help

  1. #1
    Member
    Join Date
    Aug 2021
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default cnc 1200 - 1200 mm need help

    hello guys am new member
    am a 3D architectural designer
    i bought a chinise cnc with a table (1200/1200mm) without its own computer
    so i bought an computer for it i instaled the driver card correctly and the nc studio too and the machine is working ...
    now the problem is when i give it an order to cut a square (150/150mm) ... the machine cut it (120/60mm)
    i dont know what to do
    any advices ?

    Similar Threads:


  2. #2
    Member
    Join Date
    Apr 2004
    Location
    Oakland CA USA
    Posts
    5405
    Downloads
    0
    Uploads
    0

    Default Re: cnc 1200 - 1200 mm need help

    That sounds like a problem with your steps per unit settings. You need to increase the steps proportionate to the error until it cuts accurately. If you know the pitch of your screws and the micro-stepping factor of your drives you can calculate it, but trial and error works too.

    Andrew Werby
    https://computersculpture.com/


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

cnc 1200 - 1200 mm need help

cnc 1200 - 1200 mm need help

cnc 1200 - 1200 mm need help