Hi!
I got a spindle problem with my machine.
Im getting about 0.01 to 0.02mm deflection when pushing hard on the spindle with my hand, dubble that when including pulling on the spindle.
I was hoping there was a way of reducing the spindle play by preloading the bearings more but they seem to be shimsed by ground spacers.
Anyone have pulled one of these apart?
Would be awsome to have the bearing models before pulling the spindle apart so i can have everything ready to change.
Found a exploded view on the web with 4 angular contact bearings on the bottom part and 2 at the top, but that wasent the exact same machine.
Any input on this would be great.
I have attached some pictures.