Need Help! 1987 NIkken rotary table minimum index? (CNC-250 DCF + 8800 DX control)


Results 1 to 2 of 2

Thread: 1987 NIkken rotary table minimum index? (CNC-250 DCF + 8800 DX control)

  1. #1
    Member cjr01's Avatar
    Join Date
    May 2020
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default 1987 NIkken rotary table minimum index? (CNC-250 DCF + 8800 DX control)

    Hi Guys,

    I am looking to purchase an old (1987) Nikken rotary table with a stand alone controller, but I am having trouble finding some info that I need.

    I need to be able to index 1.5 degrees (240 increments around the part).
    However, it is my understanding that many rotary tables with standalone control can only do 1 degree or 5 degree indexing.

    I've searched pretty hard on google, but have not been able to come up with an answer (or I'm just not using the right search terms)

    Does anybody have experience/knowledge on these Nikken units that may be able to shed some light?

    The unit is a CNC-250 DCF with a 8800 DX control.

    The actual unit that I am looking at is not under power so unable to actually test.

    Thanks!

    Similar Threads:


  2. #2
    Member machinehop5's Avatar
    Join Date
    Aug 2009
    Location
    United States
    Posts
    1567
    Downloads
    5
    Uploads
    2

    Default Re: 1987 NIkken rotary table minimum index? (CNC-250 DCF + 8800 DX control)

    ...no 1st hand knowledge with this model Rotary Table, but most likely is programmable for 240/1.5 degrees...the Interface to your machine is the real question for automatic operations. Found some photos of the unit (I think)

    1987 NIkken rotary table minimum index? (CNC-250 DCF + 8800 DX control)-8800dx-controller-jpg

    1987 NIkken rotary table minimum index? (CNC-250 DCF + 8800 DX control)-rotary-table-jpg

    1987 NIkken rotary table minimum index? (CNC-250 DCF + 8800 DX control)-cnc250-jpg

    good luck,
    DJ



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

1987 NIkken rotary table minimum index? (CNC-250 DCF + 8800 DX control)

1987 NIkken rotary table minimum index? (CNC-250 DCF + 8800 DX control)