Need Help! NC-9ex issues


Results 1 to 2 of 2

Thread: NC-9ex issues

  1. #1
    Member
    Join Date
    Mar 2014
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default NC-9ex issues

    We have a RG-80 with a NC-9x controller. After the long holiday they started the machine. When you push the on button, the controller will show L1 then L2 and then go to 8.8 in the step area. all the other numbers are 0


    Has anyone had anything like his before?



    Thanks

    Kenny

    Similar Threads:


  2. #2
    Member
    Join Date
    Mar 2014
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: NC-9ex issues

    NC-9ex issues-rg-80-jpg

    Attached Thumbnails Attached Thumbnails NC-9ex issues-rg-80-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

NC-9ex issues

NC-9ex issues

NC-9ex issues