We have a older cnc machine called Victor Vturn-26. As the machine was standing idle it had a short. I Powerd the machine Down and Power it back up again and the code (950 Fuse break (+24E:FX16)) I have looked at the machine and i cant find the fuse. I also looked at the electrical diagram for the machine but i cant find anything there either. i realise im new to this type of machine so ive asked my colleagues for help also but they coudnt find nothing neither.
Any ideas at this point is more then welcome, to what fuse it could be or maby where it could be located so i can check the fuse and or change it or start troubleshooting for a bad or worn wire.