what kind of turret is on this old Stand-Modern lathe?
Can someone tell me what kind of turret is on this old Stand-Modern lathe? I need to buy a boring bar tool holder for it but do not know what type of turret this is and can not pick out a compatible tool holder. It is 9.75 in. in diameter. It is circular and does NOT have flats on the circumference. Id and pics below.
STANDARD-MODERN LATHES
KESTREL ????IN? ???LS INC.
MANUFACTURED IN NORTH ???RICA
Lathe Sn: 12171
Re: what kind of turret is on this old Stand-Modern lathe?
In your case you need to turn a OD12" stock with an ID9.75" bore then finish the holders on a rotary to accommodate for the bolts (coolant and keyway patterns in a vise).
Once you got all that debured and bolted on the turret, you then proceed to boring & reaming the 8 holders individually "on the actual lathe they go on" (drill, bore, reamer tools chucked).
Only then you can source tooling for boring, etc...
Cheapest/safest/fastest way around your issue I'm afraid. One full day work