Did you get the parameters? I, too have a 510V and the parameter list if you need it. PM me if you do.
I have a matsuura mc 510v and i just loose all the parameters , does any one has a parameter list that can be email to see if i can put the machine to work
i bought that machine use and i do not have any parameter manual
thanks
Similar Threads:
- Need Help!- YASNAC 3000G Parameters
- Need Help!- YASNAC 3000G Parameters help
- Need Help!- Looking for parameters Yasnac LX2
- Yasnac LX3 Parameters
- Need Help!- MX-3 Yasnac Parameters
Did you get the parameters? I, too have a 510V and the parameter list if you need it. PM me if you do.
My email es romo0572@hotmail.com
rodrigomex,
What model Matsuura and about what year? I have Many parameters for Matsuura.
I just sent a copy of the parameters from my machine, do you have the definitions for the parameters for the MX3 on my 510V? I'd be interested if you do.
Hello
Thanks for you help.
I don't have definitions for each parameter. I found an old MX3 parameter manual, but only some of them are explained in that manual.
I thing every builder uses different parameters.
The builder usually use the 7100's parameters.
But each builder use the differently.
Hi freakycnc
Do you have the parameter set for a Matsuura mc510vf 1993? If so, it would be much appriciated.
my email is andreas-sun@hotmail.com
Regards Andreas
hello i loste the parameters of matsuura 510V
please help me to put the machine to work
my email :kamwajdi@gmail.com
thank you