What control?
Sent from my MHA-L29 using Tapatalk
OK, finally got my little cnc lathe in-place up and running. But I'm having trouble getting my head around it doesn't have a machine home position, what is the right way to set a home X0Z0?
Similar Threads:
- CNC Lathe setup
- Need Help!- Lathe G76 setup help.
- Need Help!- Add a Setup to Lathe
- D&M 5 Lathe setup
What control?
Sent from my MHA-L29 using Tapatalk
It's a Washing W-31DT if that helps.
You could set each tool Z zero to the chuck face, and each tool X zero to the spindle centerline. Then all you need to know is how far the work is sticking out from the chuck.
Jim Dawson
Sandy, Oregon, USA
Any Photos of Control ...etc?
If its so old you may need to do G50 X.... Z..... From part zero.
Sent from my MHA-L29 using Tapatalk
Any previous or sample programs
Sent from my MHA-L29 using Tapatalk
User manuals?
Sent from my MHA-L29 using Tapatalk
Yes there are a couple of test programs in the memory of the controller. Well the "user manual" I got has very little in it and I think it's written in "Chinglish" no help at all
Take screen shoots and post here
Try better resolution cant zoom on the picture you posted
Sent from my MHA-L29 using Tapatalk
ChrisW, will get a better picture today and put it up, got stuck with work yesterday.