meca-divimek rotary table


Results 1 to 1 of 1

Thread: meca-divimek rotary table

  1. #1
    Registered
    Join Date
    Dec 2003
    Location
    London Uk
    Posts
    6
    Downloads
    0
    Uploads
    0

    Default meca-divimek rotary table

    Hi, I just got a meca divimek dcn200 b rotary table and I'm trying to find some specs for it as it appears the manufacture is no longer about. Measured backlash is about .05mm at radius 50mm which seems a little high. I believe it has a duplex worm gear so reckon it can be improved, but ideally need to know what I'm aiming for.
    I have dismantled it and am trying to work out how to adjust, the threaded locking ring with grubscrews removed is very tight.
    thanks in advance!

    Similar Threads:
    Attached Thumbnails Attached Thumbnails meca-divimek rotary table-meca-divimek-jpg  


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

meca-divimek rotary table

meca-divimek rotary table