Miyano BNE 51SY Lathe (Synch dual turrets)


Results 1 to 4 of 4

Thread: Miyano BNE 51SY Lathe (Synch dual turrets)

  1. #1
    Registered MCantu82's Avatar
    Join Date
    Jan 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Miyano BNE 51SY Lathe (Synch dual turrets)

    Hello, The company I work for has a Miyano BNE 51SY lathe, and I'm new to this type of machine. I have limited experience with a dual turret / dual spindle lathe and I'm just trying to get familiar with the m-wait codes. I have ran both heads on the lathe, but not simultaneously. Just wondering if there were any Miyano gurus that could help me wrap my head around the process of structuring the sync process. The sub spindle is B axis, I have done some engraving with the C axis as well as milling with the live tooling, my main problem is trying to sync everything together. Looking for proper program structure in order to get both heads working at the same time. Clearance is not an issue because as most good lathe guys know, clearance is one of the first things you master when working on a lathe. Any input would be appreciated. Thanks.

    Similar Threads:
    Last edited by MCantu82; 01-11-2019 at 12:46 AM.


  2. #2
    Registered ChrisW's Avatar
    Join Date
    May 2003
    Location
    Lake In The Hills
    Posts
    274
    Downloads
    0
    Uploads
    0

    Default Re: Miyano BNE 51SY Lathe (Synch dual turrets)

    Can't send you PM

    Sent from my MHA-L29 using Tapatalk



  3. #3
    Registered MCantu82's Avatar
    Join Date
    Jan 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Miyano BNE 51SY Lathe (Synch dual turrets)

    I turned on PM, It was set to off by default.



  4. #4
    Registered MCantu82's Avatar
    Join Date
    Jan 2019
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default Re: Miyano BNE 51SY Lathe (Synch dual turrets)

    The original post has been resolved. Thank You.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Miyano BNE 51SY Lathe (Synch dual turrets)

Miyano BNE 51SY Lathe (Synch dual turrets)