Need Help! part counter on this particular machine


Results 1 to 4 of 4

Thread: part counter on this particular machine

  1. #1
    *Registered User* dudethatsmycnc's Avatar
    Join Date
    Dec 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default part counter on this particular machine

    hello there! i was wondering if anybody knew where the part counter on this machine is? i don't really have any experience with this machiene as i am used to haas cnc's. colleegues at work don't know it either. also do we need to program the part counter or not? also i'll add in another picture of the screen i am looking at tomorow

    Similar Threads:
    Attached Thumbnails Attached Thumbnails part counter on this particular machine-img_20181204_122806-jpg  


  2. #2
    Registered
    Join Date
    Mar 2015
    Location
    Netherlands
    Posts
    155
    Downloads
    0
    Uploads
    0

    Default Re: part counter on this particular machine

    You are showing a dutch manual. I believe this is the Heckert site https://www.starrag.com/en-us/v/brand/heckert/7. Maybe you can find more information on this site. If you can't find any one to help, I will have a look at the manual, my native language is dutch.



  3. #3
    *Registered User* dudethatsmycnc's Avatar
    Join Date
    Dec 2018
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Re: part counter on this particular machine

    my native language is dutch too but unfortunately we couldn't find it anwhere in the manual perhaps i should send a email to heckert and ask them ? also i don't know if this is any helpful but here is the picture i took today from the interface of the machine ( and apparntly i am a bad photographer )

    Attached Thumbnails Attached Thumbnails part counter on this particular machine-img_20181206_140009-jpg  


  4. #4
    Registered
    Join Date
    Mar 2015
    Location
    Netherlands
    Posts
    155
    Downloads
    0
    Uploads
    0

    Default Re: part counter on this particular machine

    I am sorry, but I am not familiar with this kind of CNC software so the picture doesn't help. Send Heckert an email, they should help you as a user of their machine.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

part counter on this particular machine

part counter on this particular machine