hi there
I reinstalled a Gildemeister GAC65 series month ago after 8year maybe.
after the machine comes up and reloading the CNC parameters when I want to
go to REFERENCE-Point;
The machine sees the microswitches 24V input, but doesn't react and keep moving until erection the Overtravel micro-switch!

well, I find a piece of paper, which explained the need to",..... involves moving the encoder then the reference point will require re setting,..".
unfortunately, the explanation is not enough.

May I have your Opinion, please?

With kind Regards

R.teimouri

Similar Threads: