Dumb questions first, have you verified that the estop(s?) is pulled out and have you tried turning the machine off at the breaker?
Hi guys. I'm in desperate need of help...yesterday we've moved our shop location and machines. we''ve tested our Mikron if it starts and if the phases are corect linked in the electric table and it was. The machine started, the spindle was rotating and all it axis were corect comanded.
Today in the morning we tried to machine some parts but our Mikron was showing an error mesage when we tried to started it: 00 EMERGENCY STOP MOT. PROTECTION!
Does anyone know the cause???? Does anyone encounter something like that and fix it? Our guy who takes care of the electronic and electric side of our shop is not in town for next 3 days and we'll take any help that comes.
Thanks guys and enjoy machining!
operation sistem is TNC407.
Similar Threads:
Dumb questions first, have you verified that the estop(s?) is pulled out and have you tried turning the machine off at the breaker?
Estop(s) are pulled out and a few times we shut it off from the breaker to.
Hi, I have the same WF32 CH . kindly please send me the parameters of this machine as the system has been erased.