410PA ALZMETALL Baz 15 Problem it does not enable axes feed HOLD

[wojtekthx]

Hello
Need Help
Machine Alzmetall Baz 15 it does not enable axes Control Heidenhain 410PA
Problem Feed HOLD

Emergency stop safety relay is on. -> OK
Safety door safety relay is on. -> OK
E/R Modul is active yellow LED -> OK
MP10 for axis on -> OK






PLEASE HELP

Similar Threads:

• different feed rates for different Axes
• Feed Hold problem
• Need Help!- Feed Hold Problem
• Feed Hold
• Feed hold problem

[perisa]

Check limit switch on end positions.