FEMCO HL25E DURGA HELP


Results 1 to 2 of 2

Thread: FEMCO HL25E DURGA HELP

  1. #1
    Registered
    Join Date
    Nov 2011
    Location
    USA
    Posts
    4
    Downloads
    0
    Uploads
    0

    Default FEMCO HL25E DURGA HELP

    Hi, I recently bought a troublesome 98 FEMCO HL25E among other issues is that the operator panel is so badly worn that the silk screen is unreadable. On many of the push buttons the lens and legends have broken off. The operation manual does not have an illustration either and I am a beginner. The controller is a Fanuc 0T(A) to the best of my knowledge. Can someone with this machine please send me some pictures of the control and operator panel? Any manuals would be helpful also! Thanks Jim

    Similar Threads:


  2. #2
    Member CNCWayToGo's Avatar
    Join Date
    Feb 2020
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: FEMCO HL25E DURGA HELP

    New to the site and just saw your post in 2011 .,,,,
    were you able to purchase the soft covers for your control
    also have you had to purchase any new buttons for your other
    panel...... ours pops off and get carried out in chips over years and
    we need to purchase more...... can you offer up any help in this manner
    thank you in advance



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

FEMCO HL25E DURGA HELP

FEMCO HL25E DURGA HELP

FEMCO HL25E DURGA HELP