Brother TC-201, system CNC510. Tool probe

[Legos]

Exploiting machine Brother TC-201 1991 year.
The machine installed in the magazine probe for checking integrity of the tool (touch probe), but there is no description of a manual how to activate this feature.

Indirectly is mentioned about the code 200-201, but we did not step up work.
Also, the instructions are not quite fully described external commands m-code (three digits).
I would appreciate any information or advice.

Similar Threads:

• Need Help!- Brother (TC-201, 211, 215, 225), system CNC510
• Why no Brother Machine Tool Topic?
• Need Help!- Brother TC221 Tool Parity alarm
• Renishaw tool offset / break probe and tool life management
• Moving WIPS Probe system to another Mill?

[L. Sakthivel]

Dear Legos

I hope you have solved your Machine Problem.

We purchased Used Brother TC-201 with CNC-510 Control. We Switched ON the Machine we are getting Blank orange Display.

Kindly Suggest if you Come across this Problem.

Are you having Electric Circuit & System Manual, If you are having can you sharing to me. My email : sakthi_premierengrs@yahoo.co.in

With Regards,
L. Sakthivel