Chuck Key for Rexon RJ3 16-H

[JJDennon]

I've seen some other guys looking for this too, but never any follow up as to if they'd found the correct one.

Here is what I know about it:

Rexon RJ3 16H
5/8" Chuck
5/16" Pilot Hole

I have found this on MSC's site

MSC Item Detail

but there is no information about the sizes!



Similar Threads:

• Need Help!- 7x14 Chuck jaws are binding after mounting the chuck to the lathe.
• Hydraulic expansion chuck vs. Collet chuck
• Problem- Twin chuck Okuma OSP7000 chuck opens by itself on restart! Plus Multus comments :)
• Need Help!- How can I open Chuck 1 and pull back Chuck 2 at the same time?
• Online ordering power chuck, collet chuck, MC vises form Taiwan

[JJDennon]

Anyone have any ideas?

[JJDennon]

Anyone have any ideas?

Bump.

[Wood4]

I've seen some other guys looking for this too, but never any follow up as to if they'd found the correct one.

Here is what I know about it:

Rexon RJ3 16H
5/8" Chuck
5/16" Pilot Hole

I have found this on MSC's site

MSC Item Detail

but there is no information about the sizes!

Been looking for this using internet for some time. Ordered a 4 way. NO GOOD... Went to Home Depot found a Ryobi 5/8 Chuck key and it seems to work just fine. Very tight.