OmniTurn help and advice

[GangGuy]

I am an OmniTurn applications and support guy. I would be happy to help all with knowledge and experience. Just ask - GangGuy

Similar Threads:

• Need Help!- Hardinge Omniturn Lathe
• How about an Omniturn forum?
• OmniTurn GT-75 Review?
• Omniturn GT-75 Issues
• Need Help!- how do I add air blow to automated omniturn?

[littlerob]

Hi GangGuy, welcome to the forum. I have a question about using a W value in a G75 cycle. I get an error message, something about the feedrate. I want to leave a different amount of stock on the Z axis (.002") than the X axis (.01"), but the control won't let me do it.

Robert

[Edwin Murch]

GanngGuy,
I'm making bushings with a 5mm hole and parts are less then an inch long. Looking to deburr the back side of part ! Using a vertacal cut off pick part then live tooling to deburr hole on back side.
I can't be the only one that wants to do this in one op. on a GT.

Thanks Ed